Monday, October 14, 2013

Iphone control 6W E26, E27, B22 RGB LED bulbs

RGB LED bulbs:

Material : aluminum alloy+PC

Size: 60*120mm

Working voltage: AC100-240V 50/60HZ

Socket: E26, E27, B22

LED: SAMSUNG 5630

LED quantity: 15pcs , red, green , blue 5pcs each

Colour : RGB

Power: 6W

Power factor>0.85

Working temperature: -40-60 centigrade

CRI>80

RF: 2.4G

RGB LED bulbs description:

It is a high-performance Touch Screen Remote Control RGB LED Bulb,adopting the most advanced PWM control technology , owning 640 thousand colors and 20 automatical changing modes to choose.
Also, it has the memory function(that is to say, the previous settings will be resumed when power on again). It is widely used in KTV, bedroom, bar, etc.
With the technology of the 2.4G high frequency wireless remote control, it has the characteristics of low power consumption, long distance transmission, and strong anti-interference ability ,high speed telecommunications, etc.
The remote looks fashionable and elegant , with simple and practical functions of color changing and brightness dimming, the capacitive touch screen design makes the remote easy to use .
The forging and stamping aluminum lamp body , to the maximum extent , successfully solves the heat sink trouble by air backflow with increasing more fins. Cover of led bulb is made of PC and nanometer coolant, light transmittance over 85%, light transmitting evenly.

Iphone , Wifi , 2.4G Touch Screen 6W AC85-264V E26, E27, B22 RGB LED Bulbs

green jumps to change Adjustable Adjustable

10 White color frequently blinks Adjustable Adjustable

11 White color glitters Adjustable Adjustable

12 Red color frequently blinks Adjustable Adjustable

13 Red color glitters Adjustable Adjustable

14 Green color frequently blinks Adjustable Adjustable

15 Green color glitters Adjustable Adjustable

16 Blue color frequently blinks Adjustable Adjustable

17 Blue color glitters Adjustable Adjustable

18 Yellow color frequently blinks Adjustable Adjustable

19 Yellow color glitters Adjustable Adjustable

20 Circulation mode

V.Programming(Code Matching and Code Clearing )

Code Matching
For a new kit ( remote& bulb), the remote can work only when it is programmed to the bulb.
Please follow the below instructions:
Confirm correct connection between the bulb and the power.Switch off the power, then switch on again, and press key 5 once (within 3 seconds) the moment you see the light is on.The LED bulb blinks twice slowly when it is done.

Code Clearing
The code can be cleared as needed.The kit (remote and bulb) will stay in the original state after code clearing. It can work when code rematching is done.
Please follow the below instructions:
Also, confirm correct connection between the bulb and the power.Switch off the power, then switch on again, and long press key 5(within 3 seconds)the moment you see the light is on.The LED bulb blinks nine times swiftly when it is done.

Attention:
1.The regular product for sale is a kit (remote and bulb).he user can re programme freely as needed. One remote can control countless bulbs, but one bulb can only be controlLED by four remotes (Max).
2.Please check the battery installation and bulb(totally discharge the power), when you programme after switching off and switching on.

VI.Spectrum Curve & Distribution Curve:

Attention

1.Please check whether the input voltage and lamp base is in accordance with the product.
2.Please don’t connect wires with power on.Please switch on again only when it is in right connection and no short circuit.
3.Please keep your finger off the touch ring when installing the batteries, to improve its sensitivity,and use the remote ( 3 seconds later) after the batteries are instalLED.
Please reinstall the batteries, if the touch ring is found low sensitivity.
4.Please do not put the bulb in the place with widely range metal area or strong electromagnetic wave nearby, otherwise,the remote distance will be seriously affected .
5.If the red indicating light keeps being on,it indicates the power is not enough,please change the battaries

Package information:

Qty:1PC

GW:216g

Size::97×66×130mm

Shenzhen Brightlux Lighting Technology CO., Ltd -LED lightting products manufacturer

Shenzhen Brightlux Lighting Technology CO., Limimted , which is located in Shenzhen of China , engaged in developing , researching , manufacturing , marketing LED lighting products since 2006. Our factory covers about 3, 000 square meters and there are about 100-200 employees. We strictly follow ISO9001-2000 quality management system. All of our products are CE and RoHs approved . We are specilized in the following LED lighting products: 1. E26, E27, B22 LED bulbs, E14 LED candle bulbs, LED corn bulbs 2. MR11, MR16,GU10, E27, PAR20, PAR30, PAR38, AR111 LED spotlight 3. T5,T8,T10 LED tubes 4. 2G7,2G11, G23,G24 LED PL lamp, LED PLC lamp 5. LED panel light 6. LED downlight 7. LED ceiling light 8. LED flexible strips 9. LED rigid bars 10.LED modules 11.LED growing light 12.LED aquarium light 13.LED streetlight 14.LED floodlight 15.LED tunnel light 16.LED wall washer 17.LED track light 18.LED high bay light 19.LED underwater light 20.LED underground light 21.LED accessories, LED power supply, LED dimmer, LED controller, LED amplifier ODM/OEM are always welcome. We will continuely offer good quality product, competitive price , prompt delivery , excellent service to our customers. Our products are exported to America, European counties, Ocean ,Middle east and so on . We have won good credibility from our customers both home and abroad. Please visit our website:www.ledbrightlux.com for catalogue and detailed specification . You are welcome to send specific inquiry to us at any time . We will give you a reply within 24hours.

LED advantage

Energy saving : energy saving and no pollution, namely , enviromental protection. It is driven by direct current , Super low power consumption ( The power of single tube is from 0.03W to 1W). The electricity to light power conversion is close to 100%. It can save above 80% energy than traditional light source with the same effect . Long life span：LED light source is called as Long-life light, Which means it has not been extinguished for ever. It is a solid cold light source .It is packed by epoxy resin . No part becomes flexiable in the body of light . It don't have disadvantages such as glower easily burnt , heat deposit , light attenuation and so on . The life span is up to 50,000-100,000 hours , which is more than 10 times as traditional light source. Environmental protection: LED is a green light source . It has better environmental protection effect . There are no ultraviolet (UV) rays and ultrared rays in optical spectrum . It is of low heat , no frequent flash , no radiation. What is more, the junk material can be recycled . No pollution , free of Hg, cold light source . It is safe for us to touch . It belongs to ideal green lighting source. Little investment ：LED lights has low power , which is up to 5 times power as traditional lights. The investment for complete set is little . Without ballast , low voltage , cold light source. It won't cause a fire accident . The specification of required leading wire is lower than the specification of leading fire of present traditional lights. LED lights has a long life . It can be maintained . The maintainence is far less than present traditional lights. Variable：LED light source use red , green, blue three basic colours principle. Three basic colours have 256 levels of gray degree in the control of computer technology . They can be mixed randomly and produce 256*256*256=16777216 kinds of colours. As a result , It forms different light colours combined and variable . It also realizes colourful vaviation change effect and all kinds of photos.

Shenzhen brightlux Lighting Technology CO., Limited(http://www.ledbrightlux.com)

Monday, October 14, 2013

Iphone control 6W E26, E27, B22 RGB LED bulbs

Iphone , Wifi , 2.4G Touch Screen 6W AC85-264V E26, E27, B22 RGB LED Bulbs

Shenzhen Brightlux Lighting Technology CO., Ltd -LED lightting products manufacturer

LED advantage

About Me

Contact information

Catalogue list

1.Product Description
It is a high performance RGB LED touch remote bulb, adopting the most advanced PWM control technology, ,owning 640 thousand colors and 20 automatical changing modes to choose. Also, it has the memory function(that is to say, the previous settings will be resumed when power on again). No extra wiring installation, simple and convenient. Adopting imported LED,and the power consumption of LED bulbs is 20% of the traditional incandescent lamp. The life span of LED bulbs is over 10 times longer than the fluorescent lamp. Easy to install, use. safe and stable. The forged and stamped aluminum lamp body,to the maximum extent,successfully solves the heat sink trouble by air backflow with increasing more fins.Cover of LED bulb is made of PC and nanometer coolant,light transmittance over 85%,light transmits evenly. With the technology of the 2.4G high frequency wireless remote control, it has the the characteristics of low power consumption, long distance transmission, and strong anti interference ability ,high speed telecommunications, etc.
The remote looks fashionable and elegant , with simple and practical functions of color changing and brightness dimming, the capacitive touch screen design makes the remote easy to use . LED bulbs with lamp base E26/E27/B22(optional) are widely used in KTV, bar,etc.

2.Technical Data
Remote	Size	110×52×20mm
	Working voltage	3V (AAAX2)
	Radio frequency	2400- 2483.5MHz
	Modulation mode	GFSK
	Emission power	6db
	Standby power consumption	10uA
	Material	ABS
	Fabrication processing	Multicolor printing & UV varnish
Bulb	Size	123x60mm
	LED Power	6W
	Working Temp	-40—60
	LED Quantity	5 pcs per for R,G .B three color
	LED Type	SAMSUNG 5630
	LED Wavelength	R 620nm;G 510nm;B 460nm
	Luminous flux (max)	280LM
	Working voltage	86V~264V 50/60HZ
	Power factor	>0.85
	Lamp base	E27/E26/B22 (optional)
	Telecontrol distance	20~30 meters
	Programs	20 kinds

4. Program List

Number	Mode	Brightness state	Speed state
1	Static white color	Adjustable	Unadjustable
2	White color gradual changes	Adjustable	Adjustable
3	All colors gradual change	Adjustable	Adjustable
4	Red/green/ blue three colors gradual change	Adjustable	Adjustable
5	Seven colors jump to change	Adjustable	Adjustable
6	Three colors jump to change	Adjustable	Adjustable
7	Red/ green jumps to change	Adjustable	Adjustable
8	Red/blue jumps to change	Adjustable	Adjustable
9	Blue/green jumps to change	Adjustable	Adjustable
10	White color frequently blinks	Adjustable	Adjustable
11	White color glitters	Adjustable	Adjustable
12	Red color frequently blinks	Adjustable	Adjustable
13	Red color glitters	Adjustable	Adjustable
14	Green color frequently blinks	Adjustable	Adjustable
15	Green color glitters	Adjustable	Adjustable
16	Blue color frequently blinks	Adjustable	Adjustable
17	Blue color glitters	Adjustable	Adjustable
18	Yellow color frequently blinks	Adjustable	Adjustable
19	Yellow color glitters	Adjustable	Adjustable
20	Circulation mode
V.Programming(Code Matching and Code Clearing )
Code Matching For a new kit ( remote& bulb), the remote can work only when it is programmed to the bulb. Please follow the below instructions: Confirm correct connection between the bulb and the power.Switch off the power, then switch on again, and press key 5 once (within 3 seconds) the moment you see the light is on.The LED bulb blinks twice slowly when it is done.
Code Clearing The code can be cleared as needed.The kit (remote and bulb) will stay in the original state after code clearing. It can work when code rematching is done. Please follow the below instructions: Also, confirm correct connection between the bulb and the power.Switch off the power, then switch on again, and long press key 5(within 3 seconds)the moment you see the light is on.The LED bulb blinks nine times swiftly when it is done.

Attention: 1.The regular product for sale is a kit (remote and bulb).he user can re programme freely as needed. One remote can control countless bulbs, but one bulb can only be controlLED by four remotes (Max). 2.Please check the battery installation and bulb(totally discharge the power), when you programme after switching off and switching on.
VI.Spectrum Curve & Distribution Curve:

Attention
1.Please check whether the input voltage and lamp base is in accordance with the product. 2.Please don’t connect wires with power on.Please switch on again only when it is in right connection and no short circuit. 3.Please keep your finger off the touch ring when installing the batteries, to improve its sensitivity,and use the remote ( 3 seconds later) after the batteries are instalLED. Please reinstall the batteries, if the touch ring is found low sensitivity. 4.Please do not put the bulb in the place with widely range metal area or strong electromagnetic wave nearby, otherwise,the remote distance will be seriously affected . 5.If the red indicating light keeps being on,it indicates the power is not enough,please change the battaries
Package information:
Qty:1PC
GW:216g
Size::97×66×130mm